WDR-3500CS ultra-high pressure steel wire winding servo precision CNC cold forging hydraulic press
Product Description
1.3. Recommended conditions for machine use:
1.3.1. Working environment temperature: 0-55℃
1.3.2. Relative humidity: no more than 85%
1.3.3. Power supply voltage: 380V±5%50HZ
1.3.4. Altitude: no more than 1500mm
1.3.5. Media used in hydraulic system: 68# anti-wear hydraulic oil.
1.4. The machine's semi-automatic action is as follows:
The semi-automatic action of the machine is as follows: (the blanking cylinder is at the lower limit) the blank holder cylinder pushes up (time signal) → the slider moves down quickly (stroke signal) → the slider presses slowly (pressure signal, stroke detection) → pressure maintaining (time signal) → cutting pressure (pressure signal) → Slide block returns (stroke signal) → Block stops (stroke signal) + edge holder is ejected upward (time signal) → edge cylinder returns (time signal) and material cylinder is pushed up (time signal) → blanking red returns → stop (take the workpiece, one cycle ends) .
Technical parameters:
Serial number | project | unit | parameter | |
1 | Master cylinder force | KN | 35000(adjustable) | |
2 | Liquid working pressure | MPa | 80/20 | |
3 | Master cylinder stroke | mm | 300(adjustable) | |
4 | Maximum opening height | mm | 1000 | |
5 | Height from the ground | mm | 800 | |
6 | Master cylinder speed | No load down | mm/s | 260(adjustable) |
suppress | mm/s | 15(adjustable) | ||
Return | mm/s | 260(adjustable) | ||
7 | Lower feed cylinder force | KN | 1000 (adjustable) | |
8 | Lower feed cylinder stroke | mm | 200 (adjustable) | |
9 | Side pressing cylinder force | KN | 1200 (adjustable) | |
10 | Stroke of edge cylinder | mm | 100 (adjustable) | |
11 | Workbench size | about | mm | 1100 |
Before and after | mm | 1100 | ||
12 | Servo motor power | KW | 78.3 | |
13 | Maximum boost stroke of oil cylinder | mm | 25 | |
14 | Cooling method | Oil cooler (optional) | ||