WDR-5000CS large ultra-high pressure wire winding hydraulic press (2)

1.3. Machine usage conditions:

1.3.1. Working environment temperature: 0-55℃

1.3.2. Relative humidity: not more than 85%

1.3.3. Power supply voltage: 380V±5% 50HZ

1.3.4. Altitude: no more than 1500m

1.3.5. Media used in hydraulic system: 68# anti-wear hydraulic oil.

1.4. The machine's semi-automatic action is as follows:

The machine is semi-automatically operated as follows: (the discharge cylinder is at the lower limit) The pressing cylinder is lifted upward (time message) → the slider goes down quickly (stroke message) → the slider is pressed slowly (pressure message, stroke detection) → the pressure hold (time message) → the pressure relief (pressure message) → the slider returns (stroke message) → the slider stops (stroke message) → the pressing cylinder is lifted up (time message) → the pressing cylinder is lifted up (time message) → the cutting cylinder is lifted up (time message) → the cutting cylinder is lifted (time message) → the cutting cylinder is returned (time message) → the cutting cylinder is returned → the cutting cylinder is returned → stop (take the workpiece, and one cycle ends).

Main technical parameters: