WDR19-10000DS ultra-high pressure servo precision CNC hot and cold forging hydraulic press

1.3. Machine usage conditions:

1.3.1. Working environment temperature: 0-55°C

1.3.2. Relative humidity: not more than 85%

1.3.3. Power supply voltage: 380V±5%50HZ

1.3.4. Altitude: no more than 1500m

1.3.5. The medium used in the hydraulic system: 68# anti-wear hydraulic oil

1.4. The machine"s semi-automatic action is as follows:

(The front and rear outer ejector cylinders are at the lower limit, and the center ejector cylinder is at the lower limit) The mold transfer workbench is parked outside the workbench → place the parts → the mold transfer workbench moves into the machine workbench (stroke signal) → the four compression cylinders press down and maintain pressure → the master cylinder moves down quickly (stroke signal) → the master cylinder slowly presses down (pressure signal, stroke detection) → the master cylinder maintains pressure (time signal) → pressure relief (pressure signal) → the master cylinder slowly returns (stroke signal) → main cylinder Cylinder quick return (stroke signal) → center ejector cylinder ejection (time signal) → center ejector cylinder retreat (time signal) → four pressing cylinders return → four guide ejector cylinders on the mold transfer table to lift it → mold transfer work The table runs to the outside of the workbench (fast rotation and slow rotation) → stop (stroke signaling) → ejection of the outer (front and rear) ejector cylinder (pressure signaling) → pick up the parts → return of the outer (front and rear) ejector cylinder (pressure signaling) → place the parts.

Main technical parameters: