YSM-1050CS servo precision CNC hydraulic press
Product Description
2. Machine parameters and process actions:
2.1 Main technical parameters:
Serial number NO. | Project Item | Unit | Parameter value | |
1 | Master cylinder nominal force | KN | 10000 (Adjustable) | |
2 | Liquid working pressure Maximum working pressure of liquid | MPa | 25 | |
3 | Work slider stroke | mm | 500 (Adjustable) | |
4 | Maximum opening height | mm | 1000 | |
5 | Slider speed Slider speed | No load down no load down | mm/s | 125 (Adjustable) |
Suppressing pressing | mm/s | 5-10 (Adjustable) | ||
Return | mm/s | 125 (Adjustable) | ||
6 | Workbench size Workbench size | Left and right LR | mm | 900 (inside the column) (Inside the column |
Front and rear FB | mm | 960 (Edge) | ||
7 | Bottom cylinder force | KN | 500 (Adjustable) | |
8 | Bottom cylinder stroke | mm | 200 (Electronic ruler control) | |
9 | Bottom cylinder speed Bottom cylinder speed | Eject eject | mm/s | 100 (Adjustable) |
Return | mm/s | 120 (Adjustable) | ||
10 | Servo motor power | KW | 40.9 | |
2.2 Typical process actions: Start the motor, one master cylinder, one master cylinder, one master cylinder, one master cylinder, one master cylinder, one return, one ejector cylinder, one material cylinder, one material cylinder, one material cylinder, one material cylinder, one material cylinder is returned (electronic ruler control), completing a working cycle.
2.2 Typical process actions: Start the motor—quickly descend the main cylinder—slowly press the main cylinder—return the main cylinder—push out the top material cylinder—and then retract the material cylinder (controlled by an electronic ruler)—completed a work cycle.
2.3. Each action can be controlled separately manually.
2.3Manual can be controlled separately.
Cutting cylinder
Cartridge valve
Motor
touchscreen
Grating scale
Electric Box, PLC
Loading the car
Loading the car