YSM-1140CS
Product Description
Main technical parameters::
Serial number NO. | Project Item | Unit | Specification spec. | |
1 | Master cylinder nominal force | KN | 1000 (Adjustable) | |
2 | Slide stroke | mm | 300 (Adjustable) | |
3 | Liquid working pressure | MPa | 25 | |
4 | Nominal force of edge pressing cylinder Nominal force of edge pressing cylinder | KN | 1000 (Adjustable) | |
5 | Edge cylinder stroke | mm | 200 (Adjustable) | |
6 | Lower ejector cylinder force | KN | 200 (Adjustable) | |
7 | Lower ejector cylinder stroke | mm | 300 (Adjustable) | |
8 | upper ejector cylinder force | KN | 200 (Adjustable) | |
9 | upper ejector cylinder stroke | mm | 100 (Time relay control) | |
10 | Height of workspace opening | mm | 800 (excluding padding) | |
11 | Distance between the surface of the workbench and the ground | mm | 2250 | |
12 | Slider running speed Slider speed | No-load downlink | Mm/s | 220 (Adjustable) |
Slow down pressing | Mm/s | 7-14 (Adjustable) | ||
Return | Mm/s | 220 (Adjustable) | ||
13 | Bottom cylinder running speed Bottom cylinder operating speed | Ejection | Mm/s | 80 (Adjustable) |
Return | Mm/s | Passive return | ||
14 | Table size | Left and left (inside the column) LR(inside the column) | mm | 1000 |
Front and back (edges) FB(edges) | mm | 1000 | ||
15 | Workbench pad size Dimensions of bench plate | Left and right LR | mm | 940 |
Front and rear FB | mm | 1000 | ||
16 | Servo motor power | KW | 60.5 | |
17 | Cooling method | Hydraulic press | 15000Kcal/h | |