Nylon tie

Nylon cable ties (cable ties) general performance

one.Mechanical properties: Nylon is an engineering plastic. Nylon cable ties injection molded with nylon 66 have excellent mechanical properties. Different specifications of nylon cable ties have different binding ring diameters and tensile strengths (tension) (see nylon cable ties specification table ).

two.Effect of temperature on nylon cable ties: Nylon cable ties can maintain excellent mechanical properties and thermal aging resistance in a wide temperature range (-40~120℃).

three.Effect of humidity on nylon cable ties: Nylon cable ties can maintain excellent mechanical properties in humid environments and when their moisture content is moderate. Nylon cable ties are hygroscopic and will affect their own properties when the temperature (moisture content) is too high or too low. For resistance strength (tensile strength) and impact strength, the recommended moisture content is 2.5±0.2%.

Four.Electrical characteristics and flame resistance: Nylon cable ties have good insulation, and the electrical rated temperature is less than 105°C without affecting its performance. The flame resistance of ordinary nylon cable ties reaches UL measurement level 94V-2, and can be customized to 94V-0 according to customer needs. grade products.

five.Resistance to chemical corrosion: Nylon cable ties have excellent resistance to chemical corrosion, but strong acids and phenolic chemicals have a great impact on its performance.

Precautions for operation and use of nylon cable ties (cable ties)

1. Nylon cable ties are hygroscopic. Do not open the package before use. After opening the package in a humid environment, try to use it up within 12 hours, or repackage the unused nylon cable ties to avoid affecting the operation and use of nylon. Tensile strength and rigidity of cable ties.

2. When operating and using, the tightening force should not exceed the tensile strength (tension) of the nylon cable tie itself.

3. The circle diameter of the object to be tied should be smaller than the circle diameter of the nylon tie. If it is greater than or equal to the diameter of the nylon tie, it will be inconvenient to tie the objects or the tie will not be tight. After tightening, the remaining length of the belt should be 80MM.

4. There should be no sharp corners on the surface of the object to be bundled.