YSM-15CS servo precision CNC hydraulic press
Product Description
3. Workflow:
3.1. Enter product information and set pressing parameters (pressure, stroke, holding time)
3.2. Peeling (pressure resets to zero)
3.3. 0-layer pressing of empty mold (records 0-layer reference data)
3.4. N times of discharge pressing (pressure or position control)
3.5 Data record
3. Workflow:
3.1. Enter product information and set compression parameters (pressure, stroke, holding time)
3.2. Peeling (pressure zeroing)
3.3. Empty mold 0-layer compression (record 0-layer reference data)
3.4. N-time feeding and pressing (pressure or position control)
3.5 Data Recording
Position number | Product Batch | Serial number No. | Starting to maintain pressure | End of pressure maintenance | ||||||
Time | Pressure | Displacement Displacement | Single layer thin Single layer thin | Time | Pressure | Displacement Displacement | Single layer thin | |||
Main technical parameters
Serial number NO. | Project Item | unit Unit | YSM-15CS Spec. | |
| 1 | Master cylinder nominal force | KN | 150 (pressure sensor control) (Pressure sensor control) | |
| 2 | Maximum working pressure of liquid Maximum working pressure of liquid | MPa | 9 | |
| 3 | Slider stroke | mm | 500 (displacement sensor control) (Displacement sensor control) | |
| 4 | Open height | mm | 1200 | |
| 5 | Slider speed Slider speed | No load down no load down | mm/s | 0-100 (Servo drive control) (Servo drive control) |
Suppressing pressing | mm/s | 0-10 (Servo drive control) (Servo drive control) | ||
Return | mm/s | 0-60 (Servo drive control) (Servo drive control) | ||
| 6 | Workbench size Workbench size | Left and right (inside the column) LR(inside the column) | mm | 890 |
Front and back (edge) FB (edge) | mm | 1040 | ||
| 7 | Machine size Machine dimensions | Long long | mm | About 1110 About 1110 |
Wide wide | mm | About 1260 About 1260 | ||
High height | mm | About 2718 About 2718 | ||
| 8 | Servo motor power | KW | About 3.7 About 3.7 | |