YSM-800CS servo precision CNC four-column hydraulic press
Product Description
2. Machine process actions:
2.1. Typical process actions:
Start the motor, the edge holder cylinder is at the upper limit, and the lower withdrawal cylinder is at the lower limit. The main cylinder moves downward quickly. The main cylinder presses slowly. The edge holder cylinder passively moves downward. The main cylinder releases pressure and returns. The edge holder cylinder returns. The withdrawal cylinder ejects and the material cylinder returns (electronic ruler control) to complete a working cycle.
2.2. Each action can be controlled manually.
Technical parameters:
Serial number | project | unit | Specification | |
1 | Nominal force of the master cylinder | KN | 8000 (adjustable) | |
2 | Slider stroke | mm | 400 (adjustable) | |
3 | Liquid working pressure | KN | 25 | |
4 | Nominal force of edge pressing cylinder | KN | 500 (manual remote control adjustment) | |
5 | Stroke of edge cylinder | mm | 100 (adjustable) | |
6 | Lower withdrawal cylinder force | KN | 200 (adjustable) | |
7 | Stroke of the material withdrawal cylinder | mm | 80 (adjustable) | |
8 | Workspace opening height | mm | 900 | |
9 | The distance between the flat surface on the workbench and the ground | mm | 1300 | |
10 | Slider running speed | No load down | mm/s | 200 |
Slow down and suppress | mm/s | 7-14 | ||
Return | mm/s | 200 | ||
11 | Bottom cylinder running speed | Eject | mm/s | 80 (adjustable) |
return | mm/s | Passive return | ||
12 | Workbench size | Left and right (inside the column) | mm | 880 |
Front and back (edge) | mm | 880 | ||
13 | Motor power | KW | 50.7 | |